LMG95单相高精度电能/功率分析仪
0.03%总精度,50kHz带宽,100kHz采样速率,连续无间隙采样测量分析过程.单通道,全球最高端功率分析仪
功率分析仪大中国地区总代理，亚太区维修服务中心。
产品特征：
- 测量电压,电流,功率,功率因数,电能等参量
- 输入通道隔离.极低的容抗和极高的动态共模抑制比及抗干扰能力
- DC to 50 kHz 高精度带宽, 即使在功率因数 <0.01 时,也能做到高精度测量.
- 连续无间隙采样测量过程
- 谐波及闪变测量,符合标准 EN 61000-3-2 和 EN 61000-3-3
- 谐波及间谐波分析,都可达99次
- 瞬态功能
- 模拟量和数字量输入输出
- 外部电压分压器输入
- 电脑接口,记忆卡插口
- 单色屏幕显示:4-8个测量值,波形图,计算图表,柱状图
- 通用的接口,经济及方便使用
- 带公式编辑器
- 带LabVIEW 驱动
典型应用:
开关电源，AC/DC电机和发电机，电子及传统的变压器, ballasts, PWM变频器，超声波发生器，铁磁损耗，节能照明，电介栅放电灯，低压和高压放电灯，电能及功率标定基准
LMG95 Single Phase Precision Power Analyzer
Typical Applications:
Measurements on switching power supplies, AC/DC motors and generators, electronic and conventional transformers, ballasts, PWM frequency inverters, ultra-sonic generators, ferromagnetic core losses, lighting, dielectric barrier discharge lamps, low and high pressure discharge lamps, calibration reference for power and energy
Measures voltage, current, inrush current, power, power factor, energy etc.
Isolated measurement inputs with extremely low capacitance against earth to assure high dynamics CMR and interference immunity
DC to 500 kHz precision bandwidth, precise at low cosphi <0.01
Absolutely gap-free measuring process
Harmonics and flicker measurement according to EN61000-3-2 and EN61000-3-3
Harmonics and interharmonics up to the 99th harmonic resp. up to 99 interharmonics
Transient function
Analog and digital in/outputs
External shunt voltage input
PC interfaces, memory-card slot
Graphical monochrome display to show 4 to 8 measured values, wave form, diagrams of calculated values and bar charts
Ergonomic user friendly interface
Formula editor
LabVIEW driver
|
Model
|
Phases
|
Frequency
|
Basic
accuracy
|
Voltage
ranges
|
Current
ranges
|
Interfaces
|
|
LMG95
|
1
|
DC - 50kHz
|
0.03%
|
6 - 600V
|
150mA - 20A
|
IEEE 488, RS 232, USB
|
|
|
|
optional 500kHz
|
|
Special modifications of measuring input ranges available as option
|
Special modifications of measuring input ranges available as option
|
|