MS13X填充柱在工业氢中氩，氧，氮的测定
MS13X填充柱在工业氢中氩，氧，氮的测定 详细信息：
名称：填充柱
规格：3m*1/8
型号：MS-13X
应用：工业氢气中氧氩，氮的测定
配置：脱氧装置
气体混合物中氧、氩、氮的分析在气体制取、催化、高分子合成、冶金和原子能等工业以及许多科研工作中是十分重要的。目前,这些气体的分析几乎无例外地采用气相色谱法。以分子筛类吸附剂(5A或13X)或高分子固定相(如Porapak Q)为分离柱;为了解决氧和氩这个难分离物质对的分离问题,须采用低柱温,如-70℃。其缺点是消耗大量致冷剂并使控温装置复杂化,灵敏度差。
浩瀚色谱（山东）应用技术开发有限公司采用MS5A填充柱，配置脱氧装置，测定工业氢气中氧氩，氮的测定，结果满意。
MS13X填充柱在工业氢中氩，氧，氮的测定 测试谱图：
MS13X packed column in the determination of argon, oxygen and nitrogen in industrial hydrogen
MS13X packed column in the determination of argon, oxygen, and nitrogen in industrial hydrogen. Details:
Name: Packed column
Specification: 3m*1/8
Model: MS-13X
Application: Determination of oxygen, argon and nitrogen in industrial hydrogen
Configuration: Deoxygenation device
The analysis of oxygen, argon, and nitrogen in gas mixtures is very important in industries such as gas preparation, catalysis, polymer synthesis, metallurgy and atomic energy, as well as many scientific researches. At present, the analysis of these gases uses gas chromatography almost without exception. Use molecular sieve adsorbent (5A or 13X) or polymer stationary phase (such as Porapak Q) as the separation column; in order to solve the problem of separation of oxygen and argon, which are difficult to separate substances, a low column temperature, such as -70℃, must be used. Its disadvantage is that it consumes a large amount of refrigerant, complicates the temperature control device, and has poor sensitivity.
Haohan Chromatography (Shandong) Applied Technology Development Co., Ltd. used MS5A packed column and equipped with deoxygenation device to determine oxygen, argon and nitrogen in industrial hydrogen, with satisfactory results.
Determination of argon, oxygen, and nitrogen in the MS13X packed column in industrial hydrogen Test spectrum: