产品介绍
S95.3 变送器将热电阻、基于热电阻的传感器、热电偶或mV 信号转换成独立于负载的与传感器特性相对应的电流信号。 由于紧凑型产品的设计，变送器可安装在B 型(DIN 43 729) 中（2 区）接线盒中或比更大的接线盒中。S95.3 变送器采用HART 协议 V5.7 通讯协议，或手持式HART 通讯编程器对S95.3 变送器进行组态。
Description
S95.3C01 / S95.3C11 is a 4...20 mA loop-powered transmitter for Pt100
sensors.
Either 2-, 3- or 4-wire sensors can be used. For 2-wire sensors an automatic
balancing of the sensor cable resistance is possible with shorted sensor
cable. The cable resistance can be manually configured as well.
Using a PC, the Windows-based Flex-program and a FlexProgrammer
configuring unit, the following parameters can be configured via the output
connectors (2-way communication): TAG no., number of wires, cable resistance,
error detection level, measuring range/unit, damping, offset and status
indication.
The Flex-program has a datalogging facility enabling the user to monitor
measuring results or calibrate the measuring setup.
S95.3C01 / S95.3C11 is embedded in silicone which makes it resistant to
humid environments.
S95.3C01 / S95.3C11, fitting into the DIN B housing, has a 6 mm center hole
for quick sensor replacement. The spring loaded mounting screws ensure a
safe fastening even in vibrating environments.
来宝会员