产品详细描述

货号                                               品名                                            规格                                   价格

5231307H4-OO-B  Sartobran-l50囊式过滤器''梯型软管进液口和出液口''15Ocm2''0.45+0.2μm  5/pk      2303.00

5231307H5-OO-B  Sartobran-300囊式过滤器''梯型软管进液口和出液口300cm2''0.45+0.2μm  5/pk       2764.00

5231307H7-OO-B  Sartobran P囊式过滤器''梯型软管进液口和出液口''0.05m2''0.45+0.2μm  5/pk          3554.00

5231307H8-OO-B  Sartobran-P囊式过滤器''梯型软管进液口和出液口''0.1 m2'' 0.45+0.2μm  5/pk         4343.00

5231307H9-00-A  Sartobran P囊式过滤器''梯型软管进液口和出液口''0.2m2， 0 . 45+0. 2μm  4/pk       5054.00

Sartobran-150/Satobran-300两种过滤器配有0.45μm+0.2μm的双层醋酸纤维素膜，不含表面活性剂，对蛋白的吸附极低。在滤器的顶端设计有带PTFE膜的排气装置，过滤时，打开排气口，气泡可以随时排出，避免产生气阻，因而保证了高流速。把排气口的盖子拧紧后，即可对滤器做完整性测试。这两种小型囊式滤器所采用的滤膜材质和结构与更大型的囊式滤器(Sartobran-P)或标准工业滤芯完全相同，单位面积的通量也完全相同，可以直接线性放大，节省规模放大时所需的验证时间和费用。 推荐配置： 带梯形软管进样口的滤器，可采用两种配置方式：即直接连接蠕动泵，或压力源+带软管出液接口的压力罐，再与滤器通过软管相连。 技术规格 材料 双层醋酸纤维素膜(0.45µm+0.2µm)，聚丙烯外壳，聚碳酸酯钟型罩，PTFE排气孔 泡点 ≥3.2 bar(320kPa)，以水为介质 接口 进液口和出液口：Sartobran-150：梯形软管接口(6-12mm)或1/2" Triclamp接口 Sartobran-300：梯形软管接口(6-12 mm) 毒性 MRC-5人胚肺细胞和L-929鼠成纤维细胞无毒性 溶出物 通过USP塑料Ⅵ级标准测试 化学兼容性 pH值4-8的水相溶液，耐醇类和碳氢化合物 过滤面积 150 cm2(Sartobran-150)，300 cm2(Sartobran-300) 耐压 20℃时最大压差4 bar(400kPa)，80℃时最大压差2 bar(200 kPa) 灭菌方式 出厂前经蒸汽灭菌，使用后可121℃高压灭菌

Sartobran-300与其它滤器过滤通量的比较 Sartobran-300与大型囊式滤器及滤芯的放大关系

产品编号 产品说明 5231307H5-OO-V Sartobran-300，梯形软管进液口和出液口，无菌包装，2个/包   6折 5231307H5-OO-B Sartobran-300，梯形软管进液口和出液口，无菌包装，5个/包  6折 5231307H5-NO-V Sartobran-300，1/4“NPT母螺进液口和梯形软管出液口，无菌包装，2个/包  6折 5231307H5-NO-B Sartobran-300，1/4“NPT母螺进液口和梯形软管出液口，无菌包装，5个/包  6折 5231307H4-OO-B Sartobran-150，梯形软管进液口和出液口，无菌包装，5个/包  6折 5231307H4-SS-B Sartobran-150，卫生法兰进液口和卫生法兰出液口，无菌包装，5个/包  6折 5231307H4-SO-B Sartobran-150，卫生法兰进液口和梯形软管接头出液口，无菌包装，5个/包  6折

官方资料：

Description

Sartobran P 150 is a disposable'' pre-sterilized'' ready-to-use membrane filter capsule. It is designed for use in small scale production of high valuable pharmaceutical and biotech products. Featuring the same materials and type of construction as any other Sartobran P filterelement'' Sartobran P 150 is ideally suited for R&D Labs in pharmaceutical development. Typical applications for Sartobran P 150 capsules are particle removal and sterilizing grade filtration of biologicals'' parenterals'' media and buffers replacing conventional stacked disc filter capsules and flat filter disc systems. The unique pleated filter construction offers excellent flow rates and superior total throughput performance in comparison to conventional filter systems. Due to the extremely low residual volume in the capsule housing after filtration product loss is minimized. The low unspecific adsorption of the celluloseacetat membrane of Sartobran P 150 guarantees high product yields. Sartobran P 150 capsules are available with hose barb or 1/2 inch Tri-Clamp connectors for simple installation to your filtration system. The Tri-Clamp connection assures secure and reliable integrity-testing. Sartobran P 150 capsules are designed'' developed and produced under a DIN/ISO 9001 certified Quality-Management-System. Each unit is tested for integrity product quality and security. A Validation Guide is available.

Applications:

Typical applications include sterilizing grade filtration of any solution sensitive to adsorption like: Therapeutics'' Bioprocessed Pharmaceuticals'' Serum'' Injectables'' Media'' Buffers.

Performance:

The unique pleated filter construction and the "built-in-prefiltration" offers excellent flow rates and superior total throughput performance'' especially in comparison to conventional stacked disc filter systems.

Highest Product Yield:

The highest product yields are realized by the combination of extremely low residual volume in the capsule housing and ultra low unspecific adsorption of the cellulose acetate membrane.

Automatic Venting:

A hydrophobic PTFE vent filter membrane positioned at the highest point upstream allows easy venting of the capsule and prevents product loss during the venting process.

Scalability:

Featuring the same materials and type of construction as any other Sartobran® P filter element'' Sartobran® P 0.2 µm 150 are ideally suited for R&D Labs in pharmaceutical development. Filtration trials can be performed using extremely small volumes of high value products .

Microbiological Retention:

Sartobran® P 0.2 µm rated capsules are fully validated as sterilizing grade filter elements according to HIMA and ASTM F-838-05 guidelines.

Quality Control:

Each individual element is integrity tested by diffusion and bubble point test prior to release'' assuring absolute reliability.

Documentation:

Sartobran® P 0.2 µm capsules are designed'' developed and manufactured in accordance with an ISO 9001 certified Quality Management System. A Validation Guide and Extractables Guide are available for compliance with regulatory requirements.

德国赛多利斯Sartorius产品在生物分子和微生物分离、浓缩、提纯、发酵和细胞培养领域有卓越的应用，赛多利斯Sartorius为您提供多种规格过滤膜和滤器，根据您的具体应用，选择最适合的产品。