PL-200 高通量自动玻片装载系统高通量自动玻片装载系统是一套先进的显微镜玻片自动装载系统，最多可放置200片玻片，结合Prior精准的自动载物平台，可完成显微样本自动取相拍照，达到无人看顾，自动换片、自动定位、自动拍照的目标。PL-200可搭配四个玻片架，每个玻片架的容量可放置50个玻片，PL-200 高通量自动玻片装载系统会自动侦测感知玻片架，并且自动判定玻片架是否被移除或安装。当系统侦测到新的玻片架时，先进的玻片侦测系统会自动侦测玻片的数量及玻片的个别位置。为了确保数据的正确性可以完整的关联到每一个玻片，并且能够符合GoodLaboratory Practice (GLP)的要求，PL-200 高通量自动玻片装载系统可再选择搭配1D或2D的BarcodeReader使用。另外，还附带一套完整的软件开发工具，可以很容易的与第三方软件进行整合。
核心系统 自动玻片装载机（PL200） 精密电动载物台 控制器（V31XYZE） 操作杆（PS3J100）
可选配件 金属卤化物光源（Lumen 200） LED照明光源（Brightfield） 滤光片转盘（发射）+适配器 滤光片转盘（激发）+适配器 光阑（激发）+适配器 控制器（V31XYZE） 操作杆（PS3J100） 对焦电机（PS3H122R）+适配器
|  |
PriorScientific Slide LoaderPL-200 (自动化玻片载台)荣获2009年LaboratoryEquipment Magazine读者最佳票选奖，对于Prior所有的成员，这是最大的激励与敬意，特别是在研发与生产制造部门的工作人员。
Prior PL-200(自动化玻片载台)对于实验室的显微研究领域提供了一个重大的进步，它整合了Prior的H101A高精度自动载物台,能够做到高精度的自动化玻片检测应用.
200的玻片的容量，代表的就是可以在无人操作的情况下，可以自动化完成好几个小时的玻片检测工作。
关键性能;
最大可装载200块玻片,15-25秒的加载时间
抽取式片夹，安全可靠
可选购条形码阅读器
方便易用的软件整合与兼容显微镜平台设计
The PL-100/PL-200 Slide Loaders are advanced systems for automatic slide handling in a variety of microscope applications. The PL-200 model is designed for 1×3 slides and accommodates up to 200 slides that are housed in four removable slide racks, each of which holds up to fifty slides. The PL-100 model is designed for 2×3 slides and is capable of handling up to 100 slideswhich are housed in two racks of fifty. Sensors on the loader monitor the presence of the slide racks so the system can intelligently respond when racks are changed in the middle of a run for example. Installation of a rack on the loader initiates a unique slide detection system which automatically identifies the location of the slides. Prior has optimized both to provide the highest productivity with a complete system capable of performing load/unload cycles in as little as 24s. The units can be used with existing microscopes simply by adding the appropriate Prior scanning stage.
Prepared specimen slides are precious, often unique, and need to be handled with care. In addition to the slide retaining design of the slide racks, a range of further safety features have been included in the units to minimize the risk of damage to slides. The slide gripper includes a sensor to detect the presence of a slide. If the state of this sensor changes due to an absent slide for example, the system will stop and report an error message. A similar approach is taken on the scanning stage where a sensor identifies if a slide is present on the stage. Slide scanning will not take place for example, if a slide is not successfully placed onto the stage. A third sensor is used to monitor the position of the slide relative to the stage. If the user inadvertently moves the scanning stage in the Z axis, collisions are avoided by this sensor.