MLC 小型压式称重传感器
测量范围 | 2000-30000 lb. |
额定输出 | 2 mV/V |
非线性 | 0.25% of R.O. |
磁滞 | 0.25% of R.O. |
安全过载 | 150% of R.O. |
美国TT MLC 小型压式称重传感器
概述
Transducer MLC为微型高量程压式应用称重传感器,尺寸小,量程高达3000磅。
The load diameter is slightly convex for accurate load distribution. Low deflection through design results in ultra fast frequency response. The MLC’s are designed to be mounted in a shallow machined flat pocket or smooth flat surface, either free or fastened via a bottom 6-32 tapped hole. These load cells are manufactured from heat treated 17-4 ph stainless steel. The sensing element incorporates bonded foil strain gages of the highest quality and is sealed for protection against most industrial environments.
传感器载荷部分微微凸起,这样的设计能精确的进行负载分配,同时偏移低,响应频率快。MLC可安装在浅、光滑的平面上,也可通过底下的螺纹孔固定传感器。其材质为经过热处理17-4PH不锈钢,集成质量最好的应变计,密封处理设计,可应对绝大部分的工业工作环境。
参数
额定输出 | 2 mV/V nominal |
非线性 | 0.25% of R.O. |
磁滞 | 0.25% of R.O. |
不可重复性 | 0.1% of R.O. |
零点平衡 | 1.0% of R.O. |
补偿温度范围 | 60° to 160°F (16℃-71℃) |
安全温度范围 | -65° to 200°F (19℃- 93℃) |
灵敏度温漂 | 0.005% of Load/°F |
零点温漂 | 0.01% of R.O./°F |
终端电阻 | 350 ohms nominal |
激励电压 | 10 VDC |
安全载荷 | 150% of R.O. |
| |
美国TT MLC 小型压式称重传感器
配件
CAL-TEDS N/A Plug & Play Option with Connector
订货型号
型号 | 量程 (磅) | 尺寸(英尺) |
D1 | D2 | H1 | H2 | H3 | 按钮半径 |
| 2000 | 0.625 | 0.450 | 0.600 | 0.480 | 0.06 | 2.0 |
MLC-3K | 3000 | 0.625 | 0.450 | 0.600 | 0.480 | 0.06 | 2.0 |
MLC-5K | 5000 | 0.625 | 0.450 | 0.600 | 0.480 | 0.06 | 2.0 |
MLC-7.5K | 7500 | 0.875 | 0.625 | 0.625 | 0.505 | 0.06 | 2.0 |
MLC-10K | 10000 | 0.875 | 0.625 | 0.625 | 0.505 | 0.06 | 2.0 F |
MLC-15K | 15000 | 1.250 | 0.875 | 1.000 | 0.880 | 0.06 | 2.0 |
MLC-20K | 20000 | 1.250 | 0.875 | 1.000 | 0.880 | 0.06 | 2.0 |
MLC-30K | 30000 | 1.250 | 0.875 | 1.000 | 0.880 | 0.06 | 2.0 |
美国TT MLC 小型压式称重传感器
相关型号
CLC