ZXHHH-300在线5U氢气发生器
ZXHHH-300在线5U氢气发生器 详细信息：
The 5U high-purity hydrogen generator is composed of an electrolytic separation tank, a switching power supply, a pressure control, a drying purification, and a flow display system. The "heart" electrolytic separation cell of the instrument is a barrel structure. The liquid storage, hydrogen production and oxygen removal can be carried out at the same time. The advantages of large electrolysis area, low pool temperature, good performance and higher purity are the replacement products of the plate type electrolytic cell. The instrument is provided with a non-liquid return device, which can effectively ensure that the instrument has no liquid return phenomenon.
Instrument technical parameters:
1, the power supply voltage: 220v 50Hz
2, the maximum power: 150W; 180W
3, the ambient temperature: 0-40 ° C relative humidity <85%.
4. Environmental conditions: no large amount of dust and corrosive gases.
5, gas purity: 99.999% (relative oxygen content)
6, the output flow: 0 -300 ml / min
0 -500 ml/min
7. Output pressure: 0.4Mpa (When special pressure is required, the factory will be notified before leaving the factory)
8, size; 5U
9, weight: 300 type is about 12Kg; 500 type is about 13Kg
Instrument features:
1, the operation is simple, just start the power switch, you can produce gas.
2. When the pressure reaches the set position, the gas production will vary according to the amount of gas used, how much will be produced, and the output pressure will be stable. The flow rate will be digitally displayed by LED, which is more intuitive and eye-catching.
3, with automatic water replenishment function, can be used continuously or intermittently.
4, liquid storage, electrolytic hydrogen production, oxygen integration, low pool temperature, long life. The purification unit and the gas storage tank are made of stainless steel.
5. There is no liquid returning device, which can effectively ensure that the instrument has no liquid return phenomenon.
ZXHHH-300在线5U氢气发生器 图片：
5U高纯氢气发生器是由电解分离池、开关电源、压力控制、干燥净化、流量显示等系统组成。本仪器的“心脏”电解分离池为桶式结构。储液、制氢、排氧可同时进行，其电解面积大、池温低、性能好、纯度更高之优点，是板式电解池的换代品。本仪器设有不返液装置，可有效的保证仪器无返液现象。
仪器技术参数：
1、电源电压：220v 50Hz
2、最大功率：150Ｗ； 180Ｗ
3、环境温度：0-40℃ 相对湿度<85%。
4、环境条件：无大量粉尘及腐蚀性气体。
5、产气纯度：99.999 %（相对含氧量）
6、输出流量： 0 -300 ml/min
0 -500 ml/min
7、输出压力：0.4Mpa（需特殊压力时,在出厂前通知厂方另定）
8、外型尺寸; 5U
9、重 量: 300 型约12Kg； 500 型约13Kg
仪器特点：
1、操作简单，只需启动电源开关，即可产气。
2、当压力达到设定位置时，产气量会根据用气量大小而变化，用多少就产多少，且输出压力稳定，流量由 LED 数码显示，更直观醒目。
3、带自动补水功能，可连续使用，也可间断使用。
4、储液、电解制氢、排氧一体化，池温低，寿命长久。净化装置和储气罐采用不锈钢材质。
5、设有不返液装置，可有效的保证仪器无返液现象。