* To mount on SM-11, DMA-1510 is required.

A motor and sensor incorporated in the drive unit of Narishige's DMA-1550 single-axis motorized stereotaxic micromanipulator enables more accurate positioning of microelectrodes. 
 Using a closed-loop control system to feed back the positional information of the drive unit to the control unit, this remotely-operated micromanipulator allows the user to derive the precise coordinates. 

Digital Display 
Unlike conventional motorized manipulators, the distance actually traveled and the coordinates are shown on the display, whereby precisely controlled movement can be achieved.

<img alt="digital display" src="http://www.tritechresearch.com/images/digital.jpg"

Coordinate Calculation 
 This function enables the user to set an arbitrary position as a reference point and the display is capable of showing the distance traveled from the reference point set. Position measurement system saves you the inconvenience of calculating the distance traveled, during and after each experiment. 

<img alt="coordinates" src="http://www.tritechresearch.com/images/coordinates.jpg"

Serves Various Functions in Various Experiments 
An arbitrary distance is configurable in both step drive and free drive. The use of the step drive allows you to advance the microelectrode while checking cells, one by one. 

Free Drive	Distance Set Drive
This mode allows step/set movement to the upper or lower direction while the operation key is pressed. In confirming the position, this mode is useful for advancing an electrode close to the sample.	In this mode, a movement distance is set. An electrode moves in an upper or lower direction by a configured distance each time the operation key is pressed.
Step Drive	Coordinate Set Drive
This mode repeats a certain distance of movement and interval in turn while the operation key is pressed. In confirming the position, this mode is used for carefully advancing an electrode.	By determining absolute target coordinates based on a set reference point and traveling to those coordinates, the micromanipulator can move the end of a microelectrode to initially set target coordinates regardless of the microelectrode's starting position. When target coordinates (+X?m) are set based on a reference point, the microelectrode travels to the set +X?m coordinates from its current coordinates (a).

USB Communications Interface 
 USB communications interface enables remote-control operation, permitting automatic drive to a specified position as well as interfacing to external hosts such as PCs through application programs 

Specifications:

Accessories included		Keypad Cable (3m) Display Cable (1.5m) Extension Cable for Display (1.5m) Power Cord Rack Mount Brackets Bracket Mounting Screws Rubber Foot Dedicated Electrode Holder
Drive Source		5-phase Stepping Motor
Movement range		35mm (Coarse/Fine/Superfine, changeable drive speed)
Minimum increment (Theoretical value)	Coarse	0.5μm
	Fine	0.05μm
	Super Fine	0.005μm
I/O port for communication		USB Type B
Working voltage		AC100V ~ 240V, 50/60Hz
Power consumption		50W
Dimensions/Weight	Drive Module	W145 x D35 c H195mm, 800g
	Control Box	W430 x D350 x H80mm, 8.2kg
	Keypad Controller	W125 x D142 x H30mm, 280g
	Display	W140 x D85 x H35mm, 260g

When attached to SM-15, the Z-axis movement cannot be provided.

---

?现货DMA-1550 Single-Axis Motorized Stereotaxic Micromanipulator现货DMA-1550 Single-Axis Motorized Stereotaxic Micromanipulator现货DMA-1550 Single-Axis Motorized Stereotaxic Micromanipulator