The SMM-200 Stereotaxic Micromanipulator is made for use in animal experiments with traditional methods of acute/chronic experiments or electro-physiological recording, as well as for newly developed methods of multi-photostimulations and silicon probes. The SMM-200 is equipped with a Y-axis control knob which makes the fine adjustment in the AP direction possible. The upper body of SMM-200 can be tilted with dual angles: AP and ML directions simultaneously.

Drill installed on SMM-200



* When the compact drill for Stereotaxic Instruments, SD-101 is installed with the SMM series, SM-15C attachment is required (sold separately).

SMM Series Comparison Table

SMM Series	SMM-100	SMM-200	SMM-100B	SMM-200B
Angles	One direction (AP or ML) Switchable	Simultaneous Two directions (AP & ML)	One direction (AP or ML) Switchable	Simultaneous Two directions (AP & ML)
Fine Y-axis	Installed	Installed	Not installed	Not installed

Holders for SMM series

Model	SMM-A	SMM-HA	SMM-HB	SMM-HC	SMM-HD
Description	Attachment	Holder for Neural Probes	Holder for Neural Probes	Cannula Holder	Multiuse Holder

Specification

Accessories included	Hex Wrenches (2mm and 2.5mm) Dedicated electrode holder (with attachment and screw) Screw for grounding Washers for grounding (Bellville washer and flat washer)
Movement range	X80mm, Y20mm, Z80mm Full rotation of knob 1mm Minimum graduation 10μm
Dimensions/Weight	W85 × D162 × H286mm, 2.09kg