现货WTT-BXWireTerminalTes…

1. Press START key to turn on your WTT-110B/220X Wire Terminal Tester
2. Press UNITS key to select desired measuring units LB / N / KG
3. Press PEAK key to select peak or real-time measuring mode
4. Insert wire sample into the appropriate size wire terminal slot
5. Open lever-clamp assembly and insert tail end of wire
6. Press START key to zero display and enter “live” measuring mode
7. Pull lever to apply force to wire and perform wire terminal pull out force measurement
8. The “live” measurement mode will time out 5 seconds after pressure is released
9. Repeat from step 4 for continued testing

 Calibration Verification Procedure 

Calibration for all WTT-110B/220X models can easily be verified with a hook weight as described below: 1. Remove the lever by unscrewing it in a counter-clockwise direction and move the Wire Clamp assembly out from the path of the hanging sample. 2. Position the WTT-110B/220X in a vertical position at the edge of a strong bench or desk. Be sure to secure it with strong clamps so it can not topple over when the weight is attached. 3. Using a heavy-duty monofilament (fishing line), wire or similar, suspend a known weight from one of the teeth on the wire terminal fixture by hooking a loop of the material over the selected tooth.