kimlbe 比重瓶 (哈伯德-卡密克瓶)15113-25
HUBBARD-CARMICK SPECIFIC GRAVITY BOTTLE
KIMAX? bottle is used in the determinationof specific gravity for a large variety of semisolid materials and emulsions.
1、Short length stopperis conical on the underside and has a hole approximately 1.6 mm in diameter toallow air to escape
2、Conical shape offersgreater stability
3、Determines specificgravity for road oils, road tars, soft tar pitches, and asphalt cements (ASTMD70); drying oils, varnishes, resins, and related materials (ASTM D1963); waterand brine (ASTM D1429); and insulating varnishes (ASTM D115)
4、Manufactured from 33expansion, low extractable borosilicate glass conforming to USP Type I and ASTME438, Type I, Class A requirements
比重瓶 (哈伯德-卡密克瓶) | 品牌：KIMBLE |
Specific Gravity, Hubbard-Carmick Bottles |
用途：测量乳状液体，如沥青、油漆、树脂、干性油等的比重。 |
简介： |
KIMAX conical-shaped bottle offering greater stability. Used in the determination of specific gravity for a large variety of semi-solid materials and emulsions, such as road oils, road tars, soft tar pitches, and asphalt cements (ASTM D70); drying oils, varnishes, resins, and related materials (ASTM D1963); water and brine (ASTM D1429); and insulating varnishes (ASTM D115). Short length stopper is conical on the underside and has a hole approximately 1.6 mm in diameter to allow air to escape. |
货号 | 容量 (mL) | 全高 (mm) | 外径 (mm) | 自重(g) | 包装 (个/件) |
15113-25 | 25 | 55 | 40 | 35 | 12 |
Part Number | 15113-25 |
Name | Hubbard-Carmick Specific Gravity Bottle |
Capacity (mL) | 25 |
Height (mm) | 55 |
OD (mm) | 40 |
Standard Taper Joints | 24/12 |
Shelf-Pack Qty | 2 |
Case Qty | 12 |
Case Price, USD | $1,259.56 |
北京明阳科华生物科技有限公司
联系人：吴经理
联系电话：15011527870/13701245989
座机/传真：010-59919166
QQ客服1：204057474
QQ客服2：1170535434
Email：mingyangkehua@126.com
地址：北京市朝阳区汤立路216号东方郁金香C座815室
邮编100012
比重瓶（液体） | 品牌：KIMBLE | 
15123R |
Specific Gravity Bottle, Serialized Pycnometer |
用途：测量不同液体在某一温度下相对于同温度水的比重。 |
简介：15123R |
KIMAX bottle is supplied with a special medium length  10/18 thermometer with a range of 14 to 38 degrees C in 0.2 degrees. Retested for accuracy within ± 0.2 degrees C. Cap for the side tube is medium length 5/12 and has a small vent near the top. Body is conical for maximum stability, and capacity is within 10 percent of nominal on the flask. Each flask body is numbered for ready identification. The 50 mL size is used to obtain the specific gravity of pigments (ASTM D153). 测量比重步骤： Thoroughly clean, dry, assemble, and weigh the empty pycnometer and record. Fill with recently boiled, distilled water at a temperature a degree or two below the determination temperature. Insert thermometer into the bottle, forcing water through the overflow tube. Place in a constant temperature bath and when the desired temperature is reached, wipe off excess water from the overflow tube tip and cap. Remove from bath, wipe dry, reweigh and record. Weight difference is that of the water in the flask - the volume of the pycnometer may be calculated. Repeat process with liquid of an unknown specific gravity and record the weight difference. 
|
| |
货号 | 瓶容量（mL） | 装置高度(mm) | 装置重量(g) | 包装（个/件） | 单价(RMB) |
15123R-10 | 10 | 168 | 31 | 1 | 2823.00 |
15123R-25 | 25 | 175 | 35 | 1 | 2823.00 |
15123R-50 | 50 | 186 | 47 | 1 | 2935.00 |
| | | | | | | |
勒夏特里尔(氏)比重瓶 | 品牌：KIMBLE | 
|
Specific Gravity, Le Chatelier, Class A, Serialized |
用途：测量水泥、沙等细小物质的比重。 |
简介： |
KIMAX bottle used in the determination of the specific gravity of cement, sand, and other fine materials (ASTM C188). Designed for a 64 gram sample. Body holds approximately 250 mL, and the smaller neck bulb holds 17 mL. The neck bulb, the neck is graduated from 0 to 1.0 mL and has two extra 0.1 mL lines both 1.0 mL and 0.0 mL. The neck bulb, the neck is graduated from 18 to 24 mL in 0.1 mL subdivisions. All markings are durable white enamel. Supplied with serial number. Designed from ASTM Specification E694 and complies with C188. Replacement stopper is 41900R. |
货号 | 容量 | 全高 | 外径 | 精度 | 包装 | 单价 (RMB) |
151135-24 | 24 mL | 285mm | 90mm | 0.05±ml | 2个/件 | 3707.00 |