Features:
Laser marking is the use of energetic laser beam focused on the material surface, the rapid vaporization of the material to form a pit. As the laser beam in the material surface of a pattern of movement, while controlling the laser off, the laser beam that is in material surface processing, has become a designated pattern. Laser Marking and the traditional marking process has obvious advantages marking speed, writing a clear, permanent. Any design of computer graphics text, flexible and convenient, without printing supplies, processing costs low, non-contact processing, little pollution, no wear and tear. Can do high-speed automated operation, low production costs, using high-speed scanning galvanometer international brands, high speed, high precision galvanometer speed of up to 7000MM / s; control software: A powerful, with a variety of fill effects, graphics alignment, hierarchical set the parameters and red light-bit preview, equipped with a variety of barcode marking and graphics, and an anti-play functionality. Cycle cooling system: using 2P chillers.
Application:
Metals, alloys and oxides, ABS, epoxy resin, printing ink and so on, are widely used in electronic components, electrical appliances, jewelry, glasses, hardware, auto parts, telecommunication products, plastic buttons, integrated circuits (IC) industry.
Application areas:
Widely used in automobile, motorcycle parts, aerospace components, integrated circuit chips, food, beverages and tobacco packaging, the phone keypad, battery, electronic components, computer parts and peripherals, hardware tools, stainless steel implement, electrical appliances, communication products , medical equipment, sanitary ware, watches, jewelry, industrial bearings, wire and cable, clothing accessories and many other fields of graphics and text markup.
Features:
Inexpensive, cost-effective
The key part of high-quality components, reliability, stability
Adopt red laser positioning system, positioning accuracy and high repetition precision
Cut-off Protection, and better to extend the life of laser
Equipped with foot switch, show the human-caring
Output power stable, work around the clock
Marked effect of sophisticated anti-counterfeiting and strong, never obliterate
Specifications
Lamp-pumped laser-pumped mode
Laser wavelength 1064nm
Laser frequency 0-50KHz
Laser power 50W
Q-mode acousto-optic Q -
Pulse width 20ns
Beam quality M2 <10
Maximum carving speed points / s 7000mm / s
Standard engraving range mm 100 * 100
Laser Head Number 1
Focal length 100mm
Focus diameter of 0.05mm
Marking characters minimum 0.3mm
Cooling Water
Wearing parts Kr lamp
Wearing parts usage time 800 hours hours
Applicable to metal and some non-metallic materials,
Device Input Power AC380V ± 10% 50-60Hz
Equipment power 5KW
The software in English and Chinese Marking Software
Engraving accuracy 0.005mm
Repeatability 0.005mm