武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889
传真：027-86619889 网址：www.glmgs.com
一、CTS-22B超声探伤仪 产品简介
A brief introduction of product, CTS-22B ultrasonic flaw detector
该产品是携带式A型脉冲反射式超声波探伤仪，可用交流电或电池供电工作。仪器采用高亮度、内刻度矩形进口示波管，具有工作频率宽、探伤灵敏度高、稳定性好、波形清晰和体积小、重量轻、耗电省以及操作方便等特点。仪器适用于金属和部分非金属材料的无损检测，尤其适用于流动性大的野外或高空探伤作业，可作为无损检测人员资格考核用标准化仪器。
The product is portable A type pulse reflection type ultrasonic flaw detector, available AC or battery power supply. The instrument adopts high brightness, inner scale rectangular inlet tube, with wide working frequency, good stability, high detection sensitivity, clear waves and small volume, light weight, low power consumption and convenient operation. Apparatus suitable for metals and some non-metallic materials nondestructive testing, especially for the mobility of the field or the high altitude detection, can be used as a nondestructive testing personnel qualification assessment using standardized instruments.
二、CTS-22B超声探伤仪 技术指标
In two, CTS-22B ultrasonic flaw detector technology index
★工作频率范围：0.5～10MHz
In the operating frequency range : 0.5 ~ 10MHz
★衰减器：80dB，每2dB±0.1dB
Attenuator: 80dB, each of 2dB + 0.1dB
★垂直线性误差：≤5%
Vertical linearity error: < 5%.
★动态范围：≥30dB
Dynamic range: 30dB.
★扫描范围（钢纵波）：10～5000mm
In the scanning range ( steel p: 10 ~ 5000mm )
★水平线性误差：≤1%
Horizontal linearity error: < 1%.
★最小探测距离：≤3mm（配用5N14窄脉冲探头）
On the minimum detection range: < 3mm ( with 5N14 narrow pulse probe )
★远场分辨率：≥30dB（配用2.5P20-D探头）
In the far field resolution: = 30dB ( with 2.5P20-D probe )
★脉冲移位范围（钢纵波）：0～400mm
Of pulse shift range ( steel p: 0 ~ 400mm )
★灵敏度余量：≥46dB（2.5P20-D直探头发现200mm-ф2平底孔）
In: sensitivity = 46dB ( 2.5P20-D straight probe found that 200mm - 2 flat-bottomed hole )
★重量：主机4.5Kg，带电池6.3Kg
Weight: the host of 4.5Kg, 6.3Kg with battery
★体积（长×宽×高）：300mm×254mm×100mm
In volume ( length * width * height ): 300mm * 254MM * 100mm