武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889
传真：027-86619889 网址：www.glmgs.com
一、产品简介
One, product introduction
本仪器是按照国家标准GB/T255《石油产品馏程测定法》、国家行业标准SH/T 0121《石油产品馏程测定装置技术条件》规定的要求设计的，适用于测定发动机燃料、溶剂油和轻质石油产品的馏分组成。
The apparatus is in accordance with the national standard GB / T255" petroleum products - Determination of distillation range", the national industry standard SH / T 0121" distillation range of petroleum products determination device technical conditions" requirement design, applicable to the determination of engine fuel, solvent oil and light oil product fractions.
二、技术指标
Two, technical indicators
★工作电源：交流220V±10%，50Hz。
Power supply: exchange of 220V + 10%, 50Hz.
★烧瓶罩：用铁皮制成，表面镀黑，装有木制手柄，手柄对面设有一条能使蒸馏烧瓶支管通过的缺口，烧瓶罩上开有一个长方形观察窗，窗框上插有透明的云母片。
Of cover: flask made of iron sheet, surface plating black, with wooden handle, the handle is provided with an opposite to the distillation flask branch through the notch, a flask cover is provided with a rectangular window, the window frame is inserted on the transparent mica plate.
★蒸馏烧瓶：用硬质玻璃制成，耐热500℃以上。瓶体球径为Ф69±1mm，瓶体颈粗Ф16±1mm，支管和瓶颈成75°±3°的角度。
Of the distillation flask: hard glass, heat-resistant above 500 DEG c.. The bottle body ball diameter with 69 + 1mm, bottle neck thick with 16 + 1mm, branch and the bottleneck into 75 plus or minus 3 degree angle.
★温度计：0~360℃，分度1℃，符合国家标准GB514《石油产品试验用液体温度计技术条件》中蒸馏用温度计的规定。
Thermometer: of 0 ~ 360, dividing 1 C, in line with national standards GB514" liquid in glass thermometers for petroleum products technical conditions" in the provisions of distillation thermometer.
★冷凝槽支架：冷凝槽包括水槽、冷凝管及进出水接头等组成，冷凝管用ф16×1黄铜管精制，内表面平滑，内表面镀Ni及Cr与水平面成15°倾角，冷凝管长度若自外表面下部测量为555±3mm,出水口成圆弧形，出水接头高度高出冷凝管上端不少于10mm,保证有较好的冷却效果，冷凝槽尺寸为长180mm×宽100mm×高150mm。
Of condensate tank bracket: condensing groove comprises a water tank, condenser and water joints etc., condenser tube 16 x 1 brass refined, in smooth surface, inner surface is plated Ni and Cr and the horizontal plane form an inclination angle of 15 DEG, condensing tube length if from outer surface of lower measurement was 555 + 3mm, the outlet of arc shape, a water outlet joint height above the condensation tube is not less than 10mm, guarantee a good cooling effect, condensing groove dimensions of length x width x height of 150mm 100mm 180mm.
★加热调温器：由加热电炉和可控硅调温电路、箱壳组成，功率1000W/220V，加热升温速率可调。
Of heating thermostat: by heating furnace and silicon controlled regulating circuit, a box shell, power 1000W / 220V, heating rate adjustable.
★量筒及压铁： 量筒分10毫升、100毫升二种。10毫升量筒分度为0.1毫升，100毫升量筒分度为1毫升。压铁系炭钢制造，外表涂层为Cu,Ni,Cr在水中不锈，压在量筒底座上，足以使100毫升空量筒不从玻璃缸的水中浮起。
Of cylinder and pressing iron: a 10 ml, 100 ml two. 10 ml of a division of 0.1 ml, 100 ml 1 ml measuring cylinder indexing. Pressure iron carbon steel, surface coating for Cu, Ni, Cr in stainless steel, pressure in the cylinder base, enough to make 100 ml air cylinder from the glass cylinder water float.
★电炉垫圈：用炭化硅制造，外径为Ф105mm，内径分别为Ф50mm、Ф30mm及带缺口的三种。
Of electric washer: silicon carbide manufacturing, diameter with inner diameter of 105mm, respectively with 50mm, with 30mm and notched three.
★仪器工作环境温度：-10~+35℃。
Of instrument working environment temperature: - 10 ~ + 35 C.
★仪器工作相对环境湿度：≤85%。
Of instrument: less than 85% relative humidity.
★整机功耗：不大于1100W。
Power consumption: not more than 1100W.
三、仪器成套
In three, complete sets of equipment
★冷凝槽（连盖）
Of condensate tank (with cover)
★冷凝槽架
Of condensate tank frame
★电器加热装置（主机）
Electrical heating device ( host ).
★升降调节架
Lifting adjusting frame of
★烧瓶罩
Flask cover.
★蒸馏烧瓶：（125ml）
Of the distillation flask: ( 125ml )
★温度计：（0~365℃）
Of thermometer: ( 0 ~ 365 )
★玻璃量筒：（100 ml、10 ml）
In the glass cylinder: ( 100 ml, 10 ml )
★玻璃缸：100×240
In the glass cylinder: 100 x 240
★碳化硅垫圈：（30、50、带缺口）
Of silicon carbide washer: (30, 50, band gap)
★压铁
Of the pressing iron
★橡胶塞：（8#、4#）
Of rubber plug: ( 8, 4 # # )
★温度计挡圈：（1#）
Of thermometer ring: (1 # )
★电源线：（250V 6A）
In: power line ( 250V 6A )
★保险丝：6A（Ф5×20）
Of 6A ( with fuse: 5 x 20 )
。
.