FL-1211经济型净化转子流量计美国OMEGA欧米茄
±10% Full Scale Accuracy
± 1/2% Full Scale Repeatability
Integral Needle Control Valve
Side Plate Construction
Direct Reading Air and Water Scales
316 SS and Brass Construction Available
Shielded for Use in Pressurized Systems
Easy-to-Read 65 mm (2.6") Scale
The FL-1200 series has been discontinued. Please see the FLD100 Series as a possible alternative or contact our Flow Engineering department.
The FL-1200 flowmeters provide a low-cost means of flow rate indication. They are designed for applications where precise accuracy requirements for metering are not imperative. These meters are ideal for flow measurement applications of: purge service, sealed oil systems, bearing lubrication, cooling water indication and other associated applications.
SPECIFICATIONS
SCALES
Length: 65 mm (2.6")
Graduations: Direct reading in GPM water or SCFM air
CONSTRUCTION
Metering Tube: Borosilicate glass
Float: 316 stainless steel
Float Stops: stainless steel End Fittings and Tube Retaining Adaptor: Chrome-plated brass, 316 stainless steel
Side Plates: Chrome-plated brass
Packing Material: O-rings: Buna with Brass, FKM with stainless steel
Packing: Neoprene with brass, FKM with stainless steel
RATINGS
Pressure: 13.8 bar (200 psig) maximum
Temperature: 121°C (250°F) maximum. Fluid temperatures below 0°C (32°F) will cause frosting of the glass metering tube.
Connections: Horizontal female, 3/8 NPT
Accuracy: ±10% full scale
Repeatability: 0.5% full scale
Dimensions: 214 H x 38 W x 116 mm D (8.44 x 1.5 x 4.56")