来宝网移动站

产品介绍

专业提供德国耶拿TOC耗材配件，产品货号如下：

analytikjena

Consumables

multi N/C series

effective from 01.01.2010

  Priority Order number Description

CONSUMABLES TOC

(all types of instruments)

A 402-810.047 Special catalyst multi N/C, one filling, 40 g

recommended for multi N/C 3000/3100

A 402-810.048 Special catalyst platinum, one refill

multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S

A 402-810.050 Halogen absorber filling (copper- and brass wool)

B 402-810.058 Special catalyst multi N/C, 200 g

recommended for multi N/C 3000/3100

B 402-810.059 Special catalyst platinum, sufficient for 5 refills

multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S

A 402-825.044 Quartz wool, 1 packet

A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber

(without connections)

A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g

A 402-881.228 Disposable retention filter (water trap) A 402-881.229 TC prefilter (aerosol trap)

402-881.245 Set of TC prefilter and water trap

A 402-885.017 High-temperature mat, set of 3 pieces

B 402-885.019 Halogen absorber, complete with U-tube

multi N/C 2100 and multi N/C 2100 S multi N/C 2100 WEARING MATERIAL

B 402-000.008 Stirring magnets, 15 mm x 6 mm, 10 pieces

A 402-520.137 Glass screw joint (gray)

A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)

A 402-815.102 O-rings for combustion tube, set of 3 pieces

B 402-815.138 Dosing syringe for phosphoric acid, 5 ml

 402-815.819 O-ring; 15.5 mm x 2.5 mm; Viton IC-vessel N/C 2100 S (Stopper)

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

A 402-825.041 Fork-type clamp KS 13/2 with clamping screw

A 402-881.026 Finger-Tight-Set 1/8" for tube set, PEEK

A 402-881.027 Finger-Tight-Set 1/16" for tube set, PEEK

A 402-881.238 Septa for pneumatic heads, 10 mm o.d., set of 10 pieces

multi N/C 2100: only for N/C 2100 S

A 402-884.005 Pump hose for peristaltic pump, waste

A 402-885.010 Combustion tube

B 402-886.303 Syringe 100 µl with vent and removable needle 0.63 mm x

0.35 mm (only for APG 60)

B 402-886.304 Syringe 250 µl with vent and removable needle 1 mm x 0.7 mm (only for APG 60)

A 402-886.305 Syringe 500 µl with vent and removable needle 1 mm x 0.7

A 402-885.011 Pump hose for H3PO4 pump   mm (only for APG 60) 

A 402-886.306 Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces

multi N/C 2100: only for multi N/C 2100 S

A 402-886.310 Septum for syringe (autosampler); 9.5 mm o.d.; 1 piece

B 402-886.311 Syringe graduated 500 µl with removable needle for manual injection

A 402-886.314 Septa pre-cut for septum-head, 11 mm, 3 pieces

A 402-886.317 Condensing loop multi N/C 2000/2100/2100 S

B 402-886.318 Sample vials, 8 ml

50 mm x 18 mm, 125 pieces multi N/C 2100: for APG 60-sampler multi N/C 2100 S: for APG 60-sampler

A 402-889.050 Septum; 12.5 mm; set of 5 pieces

multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul

B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces

B 402-889.092 Sample vials, 2 ml, set of 100 pieces

(for sample rack with 112 positions)

402-890.100 IC condensing vessel multi N/C 2100

A 402-890.110 tubing kit for multi N/C 2100 S

A 402-890.111 tubing kit for multi N/C 2100

B 402-890.113 needle with luer connector for H3PO4-syringe   402-890.150 IC condensing vessel multi N/C 2100 S

WEARING MATERIAL Double Furnace Solids Module

402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces

A 402-890.103 Furnace sealing plug

A 402-890.104 Solid combustion tube

A 402-890.105 Hook

A 402-890.106 Guidance tube

402-890.107 Gasket for oxygen lock

A 402-890.108 Gas transfer tubing, adapter with ball joint

A 402-890.109 O2  tubing

multi N/C 3100 multi N/C 3100 WEARING MATERIAL

B 402-000.005 Sample vials, 80 mm x 33 mm, 70 pieces

multi N/C 3100: for dilution rack APG 64

B 402-000.008 Stirring magnets, 15 mm x 6 mm, 10 pieces

A 402-520.135 Fork-type clamp for oxygen supply

A 402-520.137 Glass screw joint (gray)

A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)

A 402-815.102 O-rings for combustion tube, set of 3 pieces

B 402-815.204 Septum silicon/PTFE, 24 mm, for screw cap EPA, set of

100 pieces

B 402-815.205 Screw cap for 40 ml EPA screw thread vial, set of 100 pieces

B 402-820.075 Bottle Insert

402-825.041 Fork-type clamp KS 13/2 with clamping screw

B 402-825.099 Sample vials for dilution rack, 100 mm x 16 mm, 10 pieces

B 402-825.119 Sample vessels for EPA Sampler with piercing function, set of 100 pieces

40 ml EPA screw thread vial

A 402-881.026 Finger-Tight-Set 1/8" for tube set, PEEK

A 402-881.027 Finger-Tight-Set 1/16" for tube set, PEEK

B 402-883.005 Sample aspiration

multi N/C 3100: also purge tube

A 402-884.005 Pump hose for peristaltic pump, waste

A 402-884.019 Injection tube

 B 402-884.021 Waste hose with screw joint (2 m)

 B 402-884.023 Lid for Bottle Insert 402-885.002 Condensation coil

A 402-885.010 Combustion tube

A 402-885.011 Pump hose for H3PO4 pump

A 402-885.016 Sample aspiration tube with screw joint

multi N/C 3100: also purge tube

B 402-886.319 Sample vials for APG 64-sampler, 78 mm x 28 mm, 100 pieces

A 402-889.050 Septum; 12.5 mm; set of 5 pieces

multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul

402-890.163 Piercing sample aspiration tube for EPA sampler, titanium

402-890.164 Piercing sample purge tube for EPA sampler, titanium

402-890.193 Tubing kit for multi N/C 3100

  402-890.200 Condensation vessel

HT 1300

HT 1300 WEARING MATERIAL

402-815.830 Gasket for dust trap for HT furnace (34 mm x 4 mm)

A 402-825.044 Quartz wool, 1 packet

A 402-881.013 U-tube, o.d. = 21 mm for halogen absorber

A 402-881.203 Glass tube, straight, without connectors

A 402-881.213 Headline-Disposable-In-Line-Filter, box of 10 pieces

B 402-886.001 Ceran field for HT furnace

B 402-886.003 Connecting hose "Analyt" for HT furnace, 4 mm x 6 mm, 1 m long

B 402-886.004 Connecting hose "pump" for HT furnace, 4 mm x 6 mm, 1 m long

A 402-886.005 Connecting hose "oxygen supply" for HT furnace, 4 mm x

6 mm, 2 m long

  B 402-886.006 Feeding tool for HT furnace

  A 402-886.014 Ceramic combustion tube

  B 402-886.114 Halogen absorber filling for straight tube A 402-886.116 Drying agent

A 402-886.118 Porcelain boat (white); 1,000 pieces

A 402-886.312 Halogen absorber filling for U-tube, o.d. = 21 mm

(conditioned)

402-886.322 Halogen absorber filling (conditioned)

for U-tube, o.d. = 21 mm, set of 5 pieces

Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.

Specifications and order numbers are subject to changes due to further technical development.

Prices are quoted exclusive of value added tax.

Purchase is subject to the General Terms and Conditions of Analytik Jena AG.

Disposable retention filter (water trap)

注射器/进样针/进样器/进样针

德国耶拿分析仪器股份公司（Analytik Jena AG，简称AJ公司）成立于1990年，前身为久负盛名的卡尔蔡司公司分析仪器部，传承了蔡司公司160多年的精密光学仪器研发制造经验，拥有德国最大的应用实验室，在德国Jena，Eisfeld，Langeweisen，Berlin和Uberlingen等多个城市设有研发和制造工厂，已发展成为德国最大的分析仪器公司之一，并成为法兰克福证交所上市公司。公司总部设在世界光学精密仪器制造中心的德国耶拿市，在全球90多个国家设有分支机构，其产品在全球拥有20万个以上的用户。德国耶拿中国代表处成立于2001年，回首十几年，耶拿公司在中国一直保持着高速发展的态势，已逐步建立了高品质的专业品牌形象，形成了耶拿中国专业严谨、勤奋敬业的团队文化。“品质造就非凡”是耶拿公司的宗旨，耶拿中国在高速发展的道路上将一如既往地为广大用户提供高品质的产品和服务。

配套使用注射器/进样针/进样器/进样针

适用于德国耶拿EA3100和EA5000硫氮氯分析仪器现货供应 价格优惠 货号如下：

产品货号402-886.311

Syringe graduated 500 μl with removable needle for manual injection

产品货号402-889.589

Syringe 10 μl, for Autoinjector, with removable needle

产品货号402-889.590

Syringe 20 μl, for Autoinjector, with removable needle

产品货号402-889.591

Syringe 40 μl, for Autoinjector, with removable needle

产品货号402-889.592

Syringe 100 μl, for Autoinjector, with removable needle

产品货号402-823.080

100μl syringe H ?8 RN 0,64(G23s)c51

产品货号402-886.305

500μl SYR H ?8Vent 1/4"-28 RN 1,0x0,7c51

产品货号402-823.056

Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

产品货号402-823.106

Syringe 20 μl, for Autoinjector, with removable needle

10、产品货号402-886.306

Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces

11、产品货号402-889.186

Removable special needles, set of 3 pieces

12、产品货号402-823.079

产品描述Removable needles for 50 and 100 μl syringes, set of 3 pieces