产品介绍
武汉格莱莫检测设备有限公司 电话：13545068882 027-86619889
传真：027-86619889 网址：www.glmgs.com
一、产品简介
One, product introduction
该产品适用于生产现场，可测量多种机加工零件的表面粗糙度，根据选定的测量条件计算机相应的参数，在液晶显示器上清晰地显示全部测量结果及图形,并可在打印机上输出，亦可与PC机进行通讯。
The product applies to the production site, can measure a variety of machining surface roughness, selected according to the conditions of measurement computer corresponding parameters, in the liquid crystal display clearly shows all the measuring results and graphics, and can output on the printer, and can also be a PC for communication.
二、技术指标
Two, technical indicators
★测量参数：Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr
Of measurement parameters: Ra, Rz, Ry, Rq, Rt, Rp, Rv, Rmax, R3z, RSk, RS, RSm, Rmr
★测量范围：Ra:0.025-12.5μm
Of measurement range: Ra: 0.025-12.5 / M
★显示范围：Ra、Rq：0.005-16μm，Rz、Ry、Rt、Rp、Rv、Rmax、R3z：0.02-160μm，RS、RSm：1mm，Rmr：0-100%（%Rt），Rsk：0-100%
On display range: Ra, Rq: 0.005-16 m, Rz, Ry, Rt, Rp, Rv, Rmax, R3z: 0.02-160 m, RS, RSm: 1mm, Rmr: 0-100% ( %Rt ), Rsk: 0-100%
★量程范围：±20μm、±40μm、±80μm
Of range: + 20, + 40 u m / m, 80 m and 0.
★最高显示分辨率：0.001μm
On the maximum display resolution: 0.001 M
★滤波方式：RC、PC-RC、GAUSS、D-P
In: RC, PC-RC filter, GAUSS, D-P
★取样长度：0.25mm、0.8mm、2.5mm、自动
Of sampling length: 0.25mm, 0.8mm, 2.5mm, automatic
★评定长度：1L-5L（可选），L为取样长度
Of evaluation length: 1L-5L (optional ), L sampling length
★测量行程长度：3L-7L（可选）
Of measuring stroke length: 3L-7L ( optional)
★最大驱动行程长度：17.5mm/0.71inch
Of maximum driving stroke length: 17.5mm / 0.71inch
★最小驱动行程长度：1.3mm/0.052inch
Of minimum driving stroke length: 1.3mm / 0.052inch
★示值误差：≤±10％
In indication error: < + 10%
★示值变动性：≤6％
On the change of indication value: < 6%
★针尖角度：90°
Tip angle: 90 degrees.
★显示方式：128×64点阵液晶（带背光）
In the display mode: 128 x 64 dot matrix LCD (with light )
★工作环境：温度：0ºC- 40ºC，相对湿度：＜90%
In the work environment: temperature: 0 degrees - 40 degrees C C, relative humidity: < 90%
★重 量：440g
Of heavy weight: 440G
★外型尺寸：140×52×48mm
Of dimensions: 140 x 52 x 48mm
三、产品特点
Three, product characteristics
★高精度电感传感器
In high precision inductance sensor
★可测量显示13个粗糙度参数
Can measure and display the 13 roughness parameters
★采用DSP(数字信号处理器)进行数据处理和控制，速度快，功耗低
On the DSP ( digital signal processor ) for data processing and control, high speed, low power consumption
★机电一体化设计，体积小，重量轻，使用方便
Design of mechanical and electrical integration, small volume, light weight, easy to use
★高品质锂离子充电电池，容量高，无记忆效应，连续工作时间大于20小时
Of high quality lithium ion rechargeable battery, high capacity, no memory effect, continuous working time more than 20 hours
★连接时代TA系列打印机，可以打印测量参数及轮廓
Connection time of TA series printers, can print the measurement parameters and profile
★标准RS232接口，可与PC机通讯
In the standard RS232 interface, can communication with the PC machine
★可选配曲面传感器测量曲面，小孔传感器测量内孔孔壁，沟槽/深槽传感器测量沟槽底部或台阶的粗糙度
Optional surface of sensor measurement surface, hole hole hole sensor measurement, trench / deep groove sensor measuring the trench bottom or a step surface roughness
★菜单操作方式
Menu operation.
★具有图形显示功能
With a graphical display function.
★传感器触针位置指示
Stylus position indicative of sensor
★带存储功能的自动关机
Of the automatic shutdown with storage function
★多语言工作方式选择
In the multilingual mode select
四、基本配置
Four, the basic configuration
★主机
On the host
★TS100标准传感器
TS100 standard sensor
★电源适配器
Power supply adapter.
★多刻线样板
In many line model
★传感器护套
In a sensor protective sleeve
★支架
In support of
来宝会员