产品介绍
武汉格莱莫检测设备有限公司 电话:13545068882 027-86619889
传真:027-86619889 网址:www.glmgs.com
一、PG-2A金相试样抛光机 产品简介
A, PG-2A metallographic sample polishing machine product brief
PG-2A型金相试样抛光机(以前简称抛光机)适用于对经磨光后的金属材料进行抛光,可获得光亮如镜的金属表面,供在显微镜下观察与测定金相组织。结构特征概述 :抛光机有焊接工作台、工作台面、抛光盘、抛光织物、抛光罩及盖和开关等基本部件组成。工作台面上安装有两个抛光盘,可供两人同时操作,使用十分方便。
Type PG-2A metallographic sample polishing machine ( previously referred to as the polishing machine ) suitable for the polished metal polishing, can be bright as a mirror of the metal surface, for under the microscope observation and determination of microstructure. Structure features: polishing machine has the welding table, table, buffing, polishing, polishing fabric cover and cover and a switch and other basic components. Working table is provided with two discs, for two people at the same time, the use is very convenient.
两台电动机都置于工作台面下部,通过固定片与台面连接。固定抛光盘用的锥套通过螺钉与电动机轴相连。抛光织物通过套圈紧固在抛光盘上。电动机的起停可分别由安装在面板上的开关进行控制,电机启动后,便可用手对试样施加压力在转动的抛光盘上进行抛光。抛光过程中加入的抛光液可通过固定在台面上塑料盘中的排水管排出。抛光罩及盖可防止灰尘及其它杂物在机器不使用时落在抛光织物上而影响使用效果。
Two motors are arranged on the table below, through a fixed piece and table connection. Fixed parabolic disc with taper sleeve through a screw and a motor shaft. Polishing fabric through the ferrule fastening on the polishing disc. Motor starting and stopping can be respectively arranged in the switch on the panel control, after the starting of the motor, then hand to exert pressure on a sample in the rotation of the polishing disc polishing. The polishing process to join the polishing liquid can be fixed on a table top plate of the plastic drain. Polishing cover and cover can prevent dust and other debris in the machine when not in use on polishing fabric and the application effects.
二、PG-2A金相试样抛光机 技术指标
In two, PG-2A metallographic sample polishing machine technical parameters
★磨盘直径:230mm
Grinding diameter: 230mm.
★磨盘转速:1400r/min
RPM: 1400R / min.
★电动机功率:200W
Motor power: 200W.
★电源电压 :220V 50HZ
In the power supply voltage : 220V 50HZ
★重量:64kg
Weight: 64kg.
★外形尺寸:770×450×1000mm
In overall size: 770 x 450 x 1000mm
备注:磨盘直径230
Note: the diameter of disc 230